Every signal
starts with copper.
Embedded antennas engineered and bench-tested for 4G/LTE, GNSS, Wi-Fi and Bluetooth — matched to your exact band, footprint and connector.
- bands
- 4 bands
- coverage
- 600 MHz–3 GHz coverage
- swept
- VNA swept
- dispatch
- 24h dispatch
Shop by band
Every listing states its tested frequency range up front.
Ready to ship
Swept on a VNA before it leaves the warehouse — the spec on the cell is the spec you get.
4G/LTE PCB Antenna
- Frequency
- 600 MHz – 3 GHz
- Peak gain
- +2.0 dBi
4G/LTE Compact PCB Antenna
- Frequency
- 600 MHz – 3 GHz
- Peak gain
- +2.0 dBi
2.4 GHz PCB Antenna
- Frequency
- 2.4–2.5 GHz
- Peak gain
- +2.0 dBi
GPS L1 Antenna
- Frequency
- 1.574–1.577 GHz
- Peak gain
- +2.0 dBi
4G/LTE Vertical-Mount Antenna
- Frequency
- 600 MHz – 3 GHz
- Peak gain
- +2.0 dBi
Weatherproof
IP67 radomes, freeze-thaw tested for outdoor and vehicle mounting.
Swept, not sampled
Every unit crosses a calibrated VNA — return it if your bench disagrees.
Datasheet included
Measured sweep, pattern and mechanical drawing ship with the part.
Samples before volume
Bench it in your own product before committing to a production run.
Three questions,
answered
It comes down to three things.
Frequency
The band your radio transmits on.
Match the tested range, not the marketing range.
Gain
For most designs, the lower figure.
High gain trades beam width for range — it only wins on a fixed link.
Connector
Whatever your board already has.
Check pin gender: RP-SMA and SMA look alike and do not mate.
- Bands
- 1 · LTE/4G/2G/3G
- Peak gain
- +2.0 dBi
- VSWR
- 2.0:1 max
- Connector
- I-PEX MHF I
Not a recommendation — just one part from the catalogue. Every product page carries the same measured figures.